The Husqvarna 555FX is a very powerful forestry clearing saw developed for full time spacing tasks in tough conditions. The X-Torq® engine provides raw power, rapid acceleration and excellent fuel economy. Short tube and bevel gear angled 24 degrees simplifies directional felling in dense forests. Very low vibrations thanks to LowVib®. Delivered with Balance XT harness.
HUSQVARNA 555FX
Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Adjustable handle bar
Adjustable and ergonomically designed handlebar for best comfort.
Thumb-operated throttle
Thumb-operated throttle for efficiency and precision control. Relieves pressure on the hand muscles.
Easy blade switch
Magnet locking pin holder facilitates easy blade switch.
LowVib®
The LowVib anti vibration system effectively reduces vibrations from the handle and throttle control.
Balance XT
Ergonomic harness with broad back support, shoulder straps and hip belt that distributes the load over a larger area. Adjustable back plate for perfect fit.
X-Torq® engine
The X-Torq® engine design reduces harmful exhaust emissions by up to 75% and increases fuel efficiency by up to 20%.
Easy starting
Air purge for very easy starting.
Forestry bevel gear
Bevel gear designed for forestry use with high blade speed for best cutting performance.
Auto return stop switch
When the machine is turned off, the stop button automatically returns to the start position for trouble free starting.
Comfortable handle
Comfortable handle design.
Optimum comfort
Soft handles for optimum comfort. The handle makes it easy to turn and use at different angles.
ENGINE
Cylinder displacement 53.3 cm³ Electrode gap 0.5 mm Fuel consumption 480 g/kWh Fuel tank volume 1.1 l Idling speed 2800 rpm Maximum power speed 9000 rpm Output shaft thread M12x1.75V Power output 2.8 kW Spark plug NGK BPMR7A Torque, max. 3.5 Nm Torque, max. at rpm 6900 rpm TRANSMISSION
Drive gear angle 24 ° Gear ratio 1.29
EMISSION
Exhaust emissions (CO average) 239.74 g/kWh Exhaust emissions (CO average) 278.42 g/kWh Exhaust emissions (HC average) 52.86 g/kWh Exhaust emissions (HC average) 59.61 g/kWh Exhaust emissions (NOx average) 1.72 g/kWh Exhaust emissions (NOx average) 1.69 g/kWh EQUIPMENT
Harness Balance XT Saw blade Scarlett 225-24 SOUND AND NOISE
Sound power level, guaranteed (LWA) 117 dB(A) Sound power level, measured 116 dB(A) Sound pressure level at operators ear 103 dB(A) DIMENSIONS
Tube diameter 35 mm Tube length 1355 mm Weight (excl. cutting equipment) 8.9 kg